HDE CDM-50, Руководство по эксплуатации и инструкция

Страница: 4 / 8

4
TO MAKE A MEASUREMENT
1. Select the required measurement units by setting the switch at the back of the unit to
display in feet and inches (I) or meters (M).
2. Set the Calibrate switch to the CABLE position.
3. Press the ON key to power on the unit.
4. Position unit directly under the cable(s) to be measured.
5. Press and hold the
MEASURE key to take a
measurement. The distance
to the first cable is shown
in the Height Measurement
location in the display.
If there is more than one
cable present, the
difference in height
between each cable is
stored in memory.
6. Press the READ CABLES 1-6
key to display each of the
cable height differences
stored in memory (Stored
Measurements). The unit
will automatically turn off
3 minutes after the last key
has been pressed.
All measurements are
displayed in the format
feet.inches followed by
fractions of an inch.