13
9.
Operate and Connect
1. Connect up to 4 sources such as a Blue-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver,
etc. to the HDMI inputs on the unit. Do not hot plug! Insert and extract cables carefully with the power
switch off. Connecting and disconnecting while the unit is powered can result in damage to circuitry.
2. Connect the output HDBT ports and/or HDMI output ports, starting with output 1, to the HDBT Receiver
display receivers (sold separately) (using well terminated or pre-terminated Cat5e/6/7 cables no longer than
230 ft/70M)
3. If utilizing UTP, connect the output HDMI ports of the HDBT Receiver display receivers (sold separately) to
high-definition displays such as an HDTV or HD projector that use HDMI inputs. Note that high-speed HDMI
cables are recommended for the distances that are required for each connection.
4. Plug in IR transmitters to the back of the Matrix Selector Switcher unit (IR TX), the transmitters are labeled IR
TX, place in front of the IR receiver of the source, ensure that each emitter is placed in front of the IR receiver
eye. Double-sided adhesive tape provided.
5. Plug in IR receivers to the port of the HDBT Receiver display receivers (sold separately) ,the receivers are
labeled IR RX, use provided double-sided adhesive tape to stick emitters at each display at a desired place
that will receive a remote signal.
6. For power, plug in the source first, followed by the Matrix (power supply included), followed by the display
receivers, followed by each output connected.
7. Power on each device in the same sequence.
