Operation instruction
5
Update instruction:
①
Open the case of transmitter, find these two jumper caps.
PDIF0
PMS
According to the silk prints nearby (“PMS” for firmware update, “PDIF0”for RS232 transmission), change the jumper
caps’ positions to set RS232 port’s function.
②
The user should receive a Firmware burn package, containing all software needed for burning and updating the
Firmware on the EEPROM.
③
Connect RS232 port use RS232 cable from RS232 port of unit to PC.
④
Power the unit.
⑤
Extract the zipped file from the burn package to a directory (e.g. C:\dir_name).
⑥
Browse to the directory (e.g. C:\dir_name\) and double click the batch file Update Source. bat(for Transmitter) or
Update Sink. Bat (for receiver).
A short description of the link created between the PC and the board appears on the screen, followed by the burn
progress percentage report.
⑦
A second stage of verifying the content of the EEPROM follows, also with a progress percentage report
