Operation instruction
4
Panel Description
Transmitter Panel
1
）
DC input port- The 5V DC is the power input for the transmitter
2
）
HDBaseT port-This is for the Cat5e cable connection between the two units.
A.yellow LED-The LINK LED indicates that an HDBaseT link connection has been established between the two boards over the
Cat5e cable.
B.green LED-
a.
When the LED is on, it indicates that video content with HDCP protection is being transferred.
b.
When the LED is blinking, it indicates that video content without HDCP protection is being transferred.
c.
When the LED is off, it indicates that no video is being transferred.
3
）
RS232 – This connector has a dual purpose
A:In its default mode, it may be used for serial RS232 data transfer over the HDBaseT link
B:When connected to a user’s PC it serves as a debug interface(See Update instruction)
4
）
LED Indicators:status–when blinking indicates the device is active.
5
）
LED Indicators:Power–The PWR LED indicates that power is available to the unit.
6
）
IR-RX port - This jack can be used for connecting IR-RX cable.
7
）
IR-TX port - This jack can be used for connecting IR-TX cable.
8
）
HDMI Input port
9
）
Ethernet port–There is one standard Ethernet port.
