HDBaseT SSH70, Руководство пользователя

Страница: 10 / 16

V2.1 10
Note:
The frame rate is not altered – only the resolution or colour space is changed.
The following command selects the 4K handling mode:
Commands Details
SET TX 4K-HANDLE w

(default: Auto)
w is one of following options:
1080P
4K60-420
AUTO (default)
GET TX 4K-HANDLE
 Get the current 4K handling mode
Video Keep Alive (No Signal Handling) (Timed)
When there is no signal present at the Transmitter (SSH70-T), the following options are
available:
 Output current Test Pattern – Maintain output video stream (Video Keep-Alive)
 No timing output (default) – (VKA off) No output video; hence video drop-out
 The Test Pattern can be displayed for a programmable time interval
The following commands select the VKA modes:
Commands Details
SET TX NO-SIGNAL-HANDLE TEST-PATTERN
 Output Test Pattern when no input signal
SET TX NO-SIGNAL-HANDLE NO-TIMING

No output when no signal – VKA off (default)
GET TX NO-SIGNAL-HANDLE

Get the current No Signal Handling mode
SET TX VKA-TIMEOUT x
(default: 0 – always on)
x
= 0 to 240 minutes (VKA time out)
0 disables the timer and the Video Keep Alive is
always on, until an input signal is detected.
Timeout values 1 to 240, will turn off the VKA at
the end of period. Values above 240 are ignored
(current setting maintained).
GET TX VKA-TIMEOUT
Get the current VKA timeout value.
Test Pattern
SSH70 transmitter (SSH70-T) has 12 test patterns and 5 resolution settings available. The
selected Test Pattern can be activated using the TP switch setting on the transmitter.
Commands Details
SET TX TEST-PATTERN x y

(default: 1080p Checkerboard)
x is Pattern - select one of following options:
BLACK, RED, GREEN, BLUE, WHITE,
RED_RAMP, GREEN_RAMP, BLUE_RAMP,
PRBS, RAMP, STRIPE, CHECKER-BOARD (default)
y is Resolution - select one of following options:
4K30, 4K25, 4K24, 1080P60, 720P60
GET TX TEST-PATTERN

Get the current Test Pattern mode