I
NSTALLATION
(P
OINT TO
P
OINT
)
1.
Connect the HDMI source device to the transmitter module (TX)
Connect the IR blaster to HD4-C6E transmitter module
2.
Connect the HD display to the receiver module (RX)
3.
Connect HDE-K TX & RX units Gigalink Port using solid CAT6/6a cable.
4.
Connect the power adaptor to TX and power on the TX module
5.
Turn-on the HD display, then turn-on the HDMI source device
Note: The blue line that connects the 2 modules must be solid CAT6 straight-thru
cable terminated in T568-B configuration. Maximum distance is 100-meters.
T568-B
C
ABLE
C
ONFIGURATION
:
I
NSTALLATION
(HDMI
+
E
THERNET
)
1.
Connect the HDMI source device to the transmitter module (TX)
Connect the IR blaster to TX
2.
Connect the HD display to the receiver module (RX)
3.
Connect the HD display to the TX “BYPASS OUT” port (optional)
4.
Connect HDE-K TX & RX units Gigalink Port using solid CAT6/6a cable.
5.
Connect the power adaptor to TX and power on the TX module
6.
Turn-on the HD display, then turn-on the HDMI source device
7.
Connect an Ethernet/Internet Router to one of the Ethernet port on TX module
8.
Connect computer & a/v devices to the remaining Ethernet ports either on the
TX or RX modules for internet access (if available).
9.
Connect the RS-232 port on the TX to a computer’s serial port
10.
Connect the RS-232 port on the RX to the display’s serial port
Note: Do put an ethernet switch/router between the TX and RX modules.
IR
P
IN
C
ONFIGURATION
:
External
IR
IN
(optional
cable)
External
IR
OUT
(cable
included)
