17
1 Ensure that all devices are turned off.
2 Connect HDMI source to “HDMI (IN)” port on the XTND transmitter.
3 Connect the XTND transmitter and receiver together by using Cat 6/7 cable connected to the each end of the “Video TPC” port.
4 Connect a display to the “HDMI (OUT)” port on the XTND receiver.
5 If any devices require IR control, ensure that IR is connected at this stage as well (page 12).
6 Plug in the supplied power lead in either the transmitter or receiver location. XTND will automatically power on. XTND power indicator
LEDs should be lit and solid.
7 Turn on the source device followed by the display.
8 Ensure that your display is set to the correct AV channel.
9
A picture should now be displayed.
Power up sequence
