MHUB 4K (8x6+2) Manual
6
SOURCE CONTROL VIA IR (BACKWARDS IR) FOR OUTPUTS G & H
1. As per Outputs A-F
2. As per Outputs A-F
3. Connect the IR Injector Dongle into HDMI port on display
4. Plug IR receiver RX into the 3.5mm jack port on the IR Injector Dongle.
5. Place IR receiver at or near the display (position it close to where you would usually point your remote to
turn your TV on or off).
DISPLAY CONTROL VIA IR (FORWARDS IR) FOR OUTPUTS A - F
1. Plug IR transmitter TX into the 3.5mm jack port labelled IR TX on the display receiver.
2. Place IR transmitter TX in front of the IR eye of the display (position it where you would usually point your
remote to turn on or off your TV).
3. Plug IR receiver RX into the numbered 3.5mm jack port labelled IR RX on the central hub. Make sure the
number corresponds with the display you want to control
4. Place IR receiver in a visible uncovered position where it is able to receive remote signals.
IR RX
IR TX
