
MHUB 4K (8x6+2) Manual
10
OPERATING YOUR SYSTEM
MANUAL OPERATION
You can switch between sources manually by using the buttons on the front of the central hub. Each output has
its own button which cycles through the inputs.
REMOTE OPERATION
The small remote control shown below is included with MHUB. This can
operate the system from directly in front of the matrix, via the IR receiver
window on the front of the matrix and also via the IR RX cables connected to
TV Receivers. There are also 4 additional buttons ALL, EDID, CLEAR and OK.
ALL - This selects all outputs so they can be set to the same input
EDID - This enables capture/learn and set EDID profiles
CLEAR - Will cancel all operations, such as Switching/EDID learning.
OK - Confirms operation
INTEGRATING WITH A CONTROL
SYSTEM VIA IP OR RS232 PORT
For more information visit:
http://support.hdconnectivity.com/2015/08/MHUB-2K-control-system-integration