HDanywhere DDSIGNALMANAGER, Руководство по эксплуатации продукта, Страница: 6 / 12

Help is only an email away: support@hdanywhere.com . 6
1. HDMI (IN) : HDMI video input port.
2. HDMI (OUT) : HDMI video output ports. Port A & B serve different purposes:
HDMI (OUT) A
Can down-scale video. ARC is not supported.
HDMI (OUT) B
Can not down-scale video. ARC is supported.
3. Audio (OUT) : Extracted audio will output from these ports. The audio will
always mirror whatever is being fed from HDMI (IN) and will always output 2
channel stereo.
4. Settings : Dip switch controls to adjust the behaviour of the device.
OFF ON
1 HDMI (OUT) A audio bypass bitstream HDMI (OUT) A down-mix audio 2Ch stereo
2 HDMI (OUT) B audio bypass bitstream HDMI (OUT) B down-mix audio 2Ch stereo
3 Read/Use EDID from HDMI (OUT) B Use standard 4K 2Ch EDID profile
4 Disable downscaling Enable downscaling
5. Service : Micro USB port for service and communicating with the device. To
connect, please page 12.
6. DC5V : Power inlet. Connect the supplied power lead to this port to provide
power to the device.
Panel description
A. Audio Type : Indicator light. Denotes what audio format is being detected and
decoded: PCM, DTS or Dolby.
B. HDMI Status : Indicator light detailing which HDMI ports are active or
connected. The light has 3 operational modes which denote the following:
- Solid
Connected correctly.
- Flashing during connection
Device is syncing
- Flashing continuously
There is a problem between HDMI device and unit. A picture may not be shown
on the display, for example. In the event that this occurs, check the following 1)
the source, by connecting it directly to the display to ensure that it is working
properly 2) try using a longer HDMI cable as shorter ones may not sync correctly
3) Set EDID position to #1.
- Off
Unable to detect a HDMI connection. Check HDMI cable and ensure all devices
are powered on.
C.
ARC : Indicator light. Denotes if ARC is active or not.
- Solid
ARC audio is being extracted from HDMI (OUT) B.
- Off
Audio is being extracted from HDMI (IN) port. This is the default mode.
D. Audio Select : A single press will toggle between the modes described by the
ARC indicator light.