HCI BedMate AP, Руководство по эксплуатации

Страница: 7 / 40

3. Place Shim onto the nose of arm over thread of Allen screw.
If your Arm has a material thickness of 0.20” you do not need the Shim (discard).
4. Slide stem over shim and place safety plate over stem and tighten Phillips screw.
5. Connect the coax cable from the TV to the coax cable from the arm using the supplies coupler.
Slightly wrench tighten both coax connectors to the coupler just enough that you cannot undo the
connection by hand.
DO NOT OVER TIGHTEN. 1/16 TO 1/8 TURN PAST FINGER TIGHT IS
ENOUGH.