HCI Fitness OmniTrainer, Руководство пользователя

Страница: 12 / 16

11
Settings
The following settings can be adjusted from the OmniTrainer Settings menu
using the [+]/[-] buttons.
Default Duration
Change the default workout time for training sessions.
Spastic Detection
Change the sensitivity of spasm detection from light, normal and heavy.
When a spasm is detected, the OmniTrianer will pause and reduce the RPM by 3
RPM.
If more than 3 spasms are detected during training, the OmniTrainer will
stop training and need to be reset before starting a new training session.
Spastic Auto
Set the direction that the changes to after the pause when spasms are detected
from Forward, Reserve or Change of Direction.
If more than 3 spasms are detected during training, the OmniTrainer will
stop training and need to be reset before starting a new training session.
Motor Power
The strength of the motor assist can be adjusted from Light, Normal and Heavy.
Also the difficulty to change between Passive and Active Mode when surpassing
the set RPM in Passive Mode.