HBX THM-0200, Руководство по установке

Страница: 2 / 20

© 2014 HBX Controls 2
INTRODUCTION
This manual will help with the installation, parameter setting, troubleshooting
and general maintenance requirements for the Controller. To guarantee the
safe and reliable operation of this Control, you must first read this manual in
detail and take particular note to any and all warnings or caution directives
prior to connecting to AC power.
Only suitably qualified individuals with formal training in electrical and HVAC
controls should attempt the installation of this equipment. Incorrect wiring
and installation will affect the warranty provided with this unit. Wiring must be
completed in accordance with the codes and practices applicable to the
jurisdiction for the actual installation.
The HBX THM-0200 is a microprocessor based controller and as such is not to
be regarded as a safety (limit) control. Please consult and install the heating or
cooling appliance in accordance with the manufacturer’s recommendations.
SAFETY SYMBOLS AND WARNINGS
D
rawing
r
eference
Refer to the specified electrical or mechanical drawing at the back
of the manual.
P
recaution
A measure taken in advance to prevent dangerous or an
unpleasant event
TABLE OF CONTENTS
Introduction Index
Safety symbols and Warnings Index
Receipt and Inspection 1
Description 1
Technical data and dimensions 1
Programming THM-0200 2 - 9
- Navigating the THM-0200 2
- Setting the THM-0200 2 - 4
- Special Functions 2 - 4
- Adjustments 5 - 9
Installation and Wiring 10 - 12
Limited Warranty 13
Index