HBS ACCU-TWIN 92-10-2280, Руководство по эксплуатации, Страница: 33 / 50

33 ©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
12 Welding
How to charge the accumulator?
1. Display shows less than 50 welds possible
‹
Connect the power unit to the external power supply unit and to the primary power
supply.
We recommend that the accumulator should be recharged after
prolonged pauses or at the end of work.
Overcharge
As soon as the charging process is completed, the power unit automatically swit-
ches over to trickle charge – overcharging is impossible.
General
Taking the above mentioned items into account, your accumulator can reach up to
200 charging cycles.
With increased age, the charging capacity of the accumulator decreases, i.e. the
accumulator is very quick recharged and on the other hand discharged after only a
few welds.
The decrease of charging capacity is absolutely normal as some of the chemical
processes in lead-gel accumulators are only reversible for a certain period of time.
We are providing you with accumulators which are maintenance-free, gas-tight and
checked to VdS. We have selected this type of accumulators due to its superior
energy density. Used under normal conditions, electrolyte cannot escape. In this
way, one can work in each working position.
Guarantee
We do not grant any guarantee on accumulators as we have no influence on proper
and appropriate operation. We apologise for any inconvenience.