HBS 93-66-2201, Руководство по эксплуатации, Страница: 13 / 70

IT 2002 Order No BA 93-66-2201 Issue 01.06.08 13
1.5 Transportation, Packaging, Storage
HBS delivers products in a specific transport package.
Save the undamaged packing. Ship and transport the device only in its original
packing.
Right before delivery, the power unit is once again checked for proper functioning and
a control mark is attached. When receiving the delivery, check everything for damages
and completeness. If damages occurred during transportation or components are
missing, inform the manufacturer or the haulier immediately (see page ii).
Proper functioning of the power unit can only be checked before starting-up by visual
inspection (visible damage).
The following items are to be observed if the power unit is not to be put into operation
immediately after delivery.
– The power unit must be stored in a secure place
– The power unit must be protected against humidity, dust, metallic dirt.
– Storage temperature: -5 °C to +50 °C
– Relative humidity:
0% to 50% at +40 °C
0% to 90% at +20 °C
During transport and set-up of the machine, safety against
tilting is only guaranteed up to an angle of 45°.
A lift unit with a hook can be used for lifting and transporting
the power unit.
Lifting the power unit using the handle is not permitted.
If you resell the power unit, please provide us with the name and postal address
of the new owner so that we can advise them of any changes to the operating
manual.
1.6 Accompanying Documents
In addition to this operating manual, you must observe the operating manual of the
welding gun as well as applicable accident prevention and safety instructions.