HBS 93-66-1202, Руководство по эксплуатации, Страница: 36 / 76

36 IT 1002 Order No. BA 93-66-1202 Issue 01.06.08
5.6.4 Library Mode
In the library mode, you can call up and modify charging voltages, depending on stud
diameter (UD/Pins).
Simultaneously press both arrow keys of welding time ( shorter , longer), for
about one second. The display welding time shows 0-06 (06 means the set
welding current and welding time for stud diameter of 6 mm).
You can pre-select the stud diameter (6 mm - 12 mm) with both arrow keys
( shorter, longer). After about 3 seconds the display ( ) jumps onto the
pre-selected charging voltage and the display ( ) onto the pre-selected
welding current.
In addition, you can modify the welding time and welding current individually by
pressing the arrow keys (as described above).
If you are working with shielding gas, different welding parameters for stud
diameters (from 6 mm to 12 mm) are available in library mode.
5.6.5 Electrode Mode
You can switch the power unit to electrode mode.
Simultaneously press both arrow keys (welding current lower higher) for
about one second. The display Welding time shows EL.
You can pre-select the welding current (from 50 to 400 A) with both arrow keys
( lower higher).
If you touch the work piece with the electrode, the power unit is switched on.
If you switch the power unit off and on, the power unit is
automatically reset to stud welding.