HBS 93-10-1552A Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 64

HBS 93-10-1552A Скачать руководство пользователя страница 32

©HBS Bolzenschweiss-Systeme GmbH & Co. KG

All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer

32

11 Connection

11.2 Connecting the Ground Cable

Connect the ground cable

Plug the ground cable into the corresponding socket of the

power unit.

Press in the plug and turn it firmly clockwise (to the right).

Only loosely made connections will result in damage to the plug

connectors.

Therefore always check that the plug connector is firmly inserted.

This prevents a poor contact and hence overheating of the plug connec-

tors.

Connect the ground clamps

Remove rust, paint and dirt from the points on the work-

piece to which you wish to connect the ground clamps.

Attach the ground clamps to the workpiece as tightly as

possible.

Pay attention to a good contact and symmetrical connec-

tion.

The welding point should be in the middle between the two ground

clamps.

«
...
30
31
32
33
34
...
»

Содержание 93-10-1552A

































































Отзывы:

Нет отзывов