HBM W1ELA/0, Инструкция по монтажу

Страница: 4 / 28

4
W 1ELA
H BM A2621−1.0en/de
Safety instructions
Use in accordance with the regulations
Displacement sensors in the W 1ELA series are intended for displacement
measurements in situations such as test rigs, pressfit devices or the
construction industry. Use for any additional purpose shall be deemed to be
not in accordance with the intended use.
To ensure operational safety, the sensor should only be operated as described
in the Mounting Instructions. It is also essential to observe the appropriate
legal and safety regulations for the application concerned during use. The
same applies to the use of accessories.
The sensor is not a safety element within the meaning of its use as intended.
Proper and safe operation of this sensor requires proper transportation,
correct storage, assembly and mounting and careful operation and
maintenance.
General dangers due to nonobservance of the safety instructions
The W 1ELA displacement sensor corresponds to the state of the art and is
failsafe.
The sensors can give rise to residual dangers if they are inappropriately
installed and operated by untrained personnel.
Everyone involved with the installation, commissioning, maintenance or repair
of a displacement sensor must have read and understood the Mounting
Instructions and in particular the technical safety instructions.
Residual dangers
The scope of supply and performance of the sensor covers only a small area
of displacement measurement technique. In addition, equipment planners,
installers and operators should plan, implement and respond to the safety
engineering considerations of displacement measurement technique in such a
way as to minimize residual dangers. Prevailing regulations must be complied
with at all times. There must be reference to the residual dangers connected
with displacement measurement technique.