HBM PW28, Инструкция по эксплуатации

Страница: 10 / 44

Mechanical installation
8
A05384_01_Y00_00 HBM: public
PW28
4.2 Mounting and load application
Secure the load cells in the four mounting holes. A platform for load application
can be mounted on top. The screws and tightening torques to be used are
given in the table below:
Mounting Thread Min. property class Tightening torque
1)
On mounting plate M8 10.9 25N
⋅
m
For load application M6 10.9 14N
⋅
m
1)
Recommended value for the specified property class. Please comply with the screw
manufacturer's instructions with regard to screw dimensions.
Connection for valve
coupling plug
(included among the
items supplied)
Female connector
Mounting plate (not included in scope of supply)
Evenness of mounting plate <0.02 mm
PW28 mounting at load application: 2xM6;
bolt property class 10.9; tightening torque 14 Nm
PW28 mounting:
4xM8 DIN 912;
bolt property
class 10.9;
tightening torque
25 Nm
Direction of load
Platform center
Platform (not included
in scope of supply)
PW28
Fig. 4.1 Load application and installation