HBM PW27, Инструкция по монтажу

Страница: 5 / 56

Safety instructions
PW27
A3010-2.0 HBM: public
3
1 Safety instructions
In cases where a breakage could injure persons or
damage equipment, the user must take appropriate
safety measures (such as safety devices to protect
against falls, collapses or overloads). For safe and
trouble‐free operation, load cells must not only be
correctly transported, stored, sited and mounted but must
also be carefully operated and maintained.
It is essential to comply with the relevant accident
prevention regulations. In particular you should take into
account the limit loads quoted in the specifications.
Intended use
Load cells are designed for metrological applications.
Use for any additional purpose shall be deemed to be
not
as intended.
In the interests of safety, load cells should only be
operated as described in the Mounting Instructions. It is
also essential to comply with the legal and safety
requirements for the application concerned during use.
The same applies to the use of accessories.
Load cells can be used as machine elements (for tank
weighing, for example). In these situations, you must
make sure that for greater sensitivity, the load cells are
not constructed with the customary safety factors found
in machine design. Load cells are not safety elements
within the meaning of appropriate use. The layout of the
electronics conditioning the measurement signal should
be such that measurement signal failure does not cause
damage.