HBM MP55, Руководство по эксплуатации

Страница: 19 / 28

19
PME − MP55IBS
HBM A0822-2.1 de/en
3 Operation via the keyboard
The parameters relevant to Interbus-S are handled via the keyboard (main
group INTERBUS-S) or by using CANOpen objects.
During measurement you can press
+
−
− to view the status messages in
the display (Measuring value, Output, Input; error messages).
Next to the status message “ERROR” the display shows the status of the
Interbus-S connection.
LED
colour
Message Meaning
Green BusActiv Communication accepted, Layer 2 OK
Yellow BusDisab Bus disconnected, Reset phase
Yellow Cable OK Connection OK, Layer 1 OK
Red DataLeng Configuration error (max. data length exceeded)
Red Interbus
InitErr
Interface module not responding
The LED shows the ME55IBS operating states (ready to take measurements,
overflow etc.) and, in addition, the Interbus-S status.