HBM ME30, Руководство по эксплуатации

Страница: 5 / 28

5
ME 30
Maintenance and cleaning
The Clip Electronic are maintenance-free. Please note the following points
when cleaning the front panel:
•
Remove the mains plug from the socket before cleaning.
•
Clean the front panel with a soft, slightly damp (not wet!) cloth. Never use
solvents, since they may damage the labelling on the front panel.
•
When cleaning, please ensure that no liquid finds its way into the device or
onto the contacts.
Residual dangers
The ME30 scope of performance and supply covers part of the measuring-
technology, only. The plant designer/constructor/operator must in addition de-
sign, realise and take responsibility for the measuring-system’s safety such
that potential residual dangers are minimized. The respective regulations
must in any case be observed. Residual dangers regarding the measuring
system must be specified explicitly.
If there is any risk of remaining dangers when working with the, it is pointed
out in this introduction by means of the following symbols:
Symbol:
DANGER
Meaning: Maximum danger level
Warns of a decidedly dangerous situation in which failure to comply with
safety requirements can lead to death or serious physical injury.
Symbol:
WARNING
Meaning:
Possibly dangerous situation
Warns of a potentially dangerous situation in which failure to comply with
safety requirements can lead to death or serious physical injury.