HBM Machines WM180V, Руководство оператора

Страница: 22 / 32

20
MAINTENANCE
Keep the maintenance of the machine tool during the operation to guarantee the accuracy and
service life of the machine tool.
1.
In order to retain the machine’s precision and functionality, it is essential to treat it with care,
keep it clean and grease and lubricate it regularly. Only through good care, you can be sure
that the working quality of the machine will remain constant.
NOTES:
Disconnect the machine plug from the mains supply whenever you carry out cleaning,
maintenance or repair work!
Oil, grease and cleaning agents are pollutants and must not be disposed of through the drains
or in normal refuse. Dispose of those agents in accordance with current legal requirements on
the environment. Cleaning rags impregnated with oil, grease and cleaning agents are easily
inflammable. Collect cleaning rags or cleaning wool in a suitable closed vessel and dispose of
them in an environmentally sound way – do not put them with normal refuse!
2.
Lubrication all slideways lightly before every use. The change gears and the leadscrew must
also be lightly lubricated with lithium base grease.
3.
During the operation, the chips which falls onto the sliding surface should be cleaned timely,
and the inspection should be often made to prevent chips falling into the position between the
machine tool saddle and lathe bed guide way. Asphalt felt should be cleaned at certain time.
NOTES:
Do not remove the chips with your bare hands. There is a risk of cuts due to sharp-edged chips.
Never use flammable solvents or cleaning agents or agents that generate noxious fumes!
Protect electrical components such as motors, switches, switch boxes, etc., against humidity
when cleaning.
4.
After the operation every day, eliminate all the chips and clean different part of the machine
tool and apply machine tool oil to prevent rusting.
5.
In order to maintain the machining accuracy, take care of the center, the surface of the
machine tool for the chuck and the guide way and avoid mechanical damage and the wear
due to improper guide.
6.
If the damage is found, the maintenance should be done immediately.
NOTES:
Repair work may only be carried out by qualified personnel with the corresponding
mechanical and electrical knowledge.