HBC micron 7, Руководство по эксплуатации

Страница: 26 / 32

Slewing Gear Release
Note:
Whenever the command "slewing gear release" is actuated by means of the radio control, it is
important that the respective check be made.
Due to the above, a clearly visible indicator lamp should be installed on the machine.
Feedback by LED
Using this function, system or machine data can be displayed on the transmitter by
LEDs.
RF-amplifier
If the transmitter is equipped with an RF-amplifier, please refer to the transmitter wiring diagram. There
you can also find the directions on how to activate the RF-amplifier.
Pre-selection of Trolley or Hoist
The operator is able to select the trolley or hoist that he wishes to control. It is also possible to
simultaneously control both trolleys/hoists, for example in order to transport particularly long or wide
loads.
Transmitter Key up
With the transmitter key up function, radio commands are only transmitted at the touch of a key and the
transmitter will automatically be switched off after 7 seconds of non-use. For example, self-monitoring
gates can thus be opened or closed by several operators.
During longer breaks the transmitter must be switched off by pressing the STOP switch.
The "transmitter key up" function also saves battery power.
Caution:
The transmitter key up function does not relieve the operator of his responsibility to turn off the
transmitter with the STOP switch when not in use.