HBC micron 7, Руководство по эксплуатации

Страница: 17 / 32

radiomatic
®
infrakey
The radio system can only be activated via an infrared
link between the transmitter and the receiver. This
increases the safety of operation, i.e. the machine can
not become inadvertently enabled.
radiomatic
®
infrakey operates either with an infrared
module in the receiver housing (radiomatic
®
infrakey
internal) or with the offset infrared antenna focus I
(radiomatic
®
infrakey external).
To activate radiomatic
®
infrakey, actuate the start button
on the transmitter.
Function of radiomatic
®
infrakey with focus I
Notes:

The range of the infrared beam is max. 20 m (66 ft).

The angle of radiation is 30°.

The front panel of the receiver must be visible (only radiomatic
®
infrakey internal).
Joystick with Deadman Function
In order that it is possible to issue control commands the button integrated into the joystick must be
pressed before the joystick is moved. The function then reverts to self-locking and remains effective until
the joystick is back in the zero position. This enables the avoidance of potential risks through the
unintentional actuation of the joystick.
Vibration Alarm
With the vibration alarm, the operator can be informed of an impending need to change the battery
and/or potential dangers on the machine through the vibration of the transmitter. This information can be
for example pre-warnings for high wind speeds or threatening excess crane loads.
Front Panel Lighting
With the front panel lighting potential dangers resulting from incorrect operation, based on poor visibility,
can be prevented. The operator simply switches on multiple LEDs, which are integrated into the rollover
bar, with a switch or button on the transmitter.