5
*A longer CAT5 cable can be used to extend the LAN from power source (rather than an
extension power cord). For other ways to maximize range, see Section 5: Maximizing
Range.
Figure 05: CAT5 Cable Plugged into POE Port
2.1.2 STEP TWO - Turn on the server. The system will automatically login and open
the HazSim server software. If you were already using the system and had closed the
program, simply re-open by clicking the desktop icon. The Hazsim server will automatically
connect to the ‘HazSim Extended’ network.
2.1.3 STEP THREE - Turn on the HazSim handheld by pressing and holding the
power button (Figure 06) located on the top of the HazSim for at least 2 seconds. Wait for
the startup to complete, approximately 30 seconds. When the device has completed
startup, it will automatically connect to the HazSim server. This connection will trigger a
popup window on your HazSim server and you are ready to start training.
To attach the confined space probe (if equipped) simply plug the hose end in to the
attachment port at the end of the HazSim. To detach, pull sleeve back on hose end and
gently pull.
Figure 06: Power button for HazSim handheld
