Hazet 9033 N-4, Руководство по эксплуатации

Страница: 13 / 24

13
HAZET-WERK Hermann Zerver GmbH & Co. KG
;
Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY
[
+49 (0) 21 91 / 7 92-0 •
\
+49 (0) 21 91 / 7 92-375 •
^
hazet.de •
]
info@hazet.de
2. Intended Use
Operational reliability is only guaran-
teed if the tool is used as intended in
accordance with the information in the ope-
rating instructions. In addition to the safety
advice in these operating instructions, the
general safety regulations, regulations for the
prevention of accidents and regulations for
environmental protection valid for this tool's
application range must be observed and
respected.
Use and maintenance of the tool must always
comply with relevant local and national regu-
lations.
• The HAZET pneumatic belt sander is suita-
ble for processing fillet welds, for sanding
down areas that are difficult to access, for
sanding spot welds and for deburring during
machine construction.
• Incorrect use of the HAZET
pneumatic belt sander or
use that fails to comply with the
safety instructions can result in serious
injury or death.
• Any deviation from the intended use
and/or any misapplication of the tools
is not permitted and will be considered
as improper use.
• Any claims against the manufacturer and/
or its authorised agents because of damage
caused by improper use of the tools are
void.
• Any personal injury or material losses
caused by improper use of the tool are the
sole responsibility of the owner.
1. Owner's
responsibility
• The tool was developed and manufac-
tured according to the technical norms
and standards valid and recognised at the
time and is considered to be operationally
reliable. Nevertheless, the tool may present
a danger when it is used in an incorrect or
inappropriate way or by non-qualified per-
sonnel. Please make sure that any person
using this tool or carrying out maintenance
work carefully reads and fully understands
these operating instructions before using
the tool.
• Any modification of the tool is strictly
forbidden.
• All safety, warning and operating instruc-
tions on the tool must be kept legible at all
times. All damaged labels or stickers must
be replaced immediately.
• All specified set values or ranges must be
observed.
• Always keep the operating instructions
close to the tool.
• The tool must only be used if it is in good
working condition.
• All safety equipment must always be
within easy reach and should be
checked regularly.
2
For your safety
Immer persönliche Schutzausrüstung tragen!
Always wear personal protective equipment!