Hazet 9033 N-4 Скачать руководство пользователя страница 12

12

 

^

 hazet.com • 

]

 [email protected]

 

1. General information

•  Please make sure that the user of this tool 

carefully reads these operating instructions 

and fully understands all information given 

before it is used.

•  These operating instructions contain impor-

tant advice that is necessary for the safe 

and trouble-free operation of your HAZET 

tool.

•  For intended use of the tool, it is essential 

that all safety instructions and other infor-

mation in these operating instructions is 

adhered to.

•  For this reason, always keep these opera-

ting instructions together with your HAZET 

tool.

•  This tool has been designed exclusively for 

specific applications. HAZET emphasises 

that any modification to the tool and/or use 

in a way that does not correspond to its 

intended application is strictly forbidden.

•  HAZET will not be liable for any injuries to 

persons or damage to property originating 

from improper or inappropriate application, 

misuse of the tool or a disregard of the safe-

ty instructions.

•  Furthermore, the general safety regulations 

and regulations for the prevention of acci-

dents in the application range of this tool 

must be observed and respected.

1

 For your Information

2. Explanation of symbols

Attention:

 Pay strict attention to  

these symbols!

READ THE OPERATING 

INSTRUCTIONS!

The owner is obliged to observe the 

operating instructions and instruct 

all users of this tool according to the 

operating instructions.

NOTE!

This symbol indicates advice that is 

helpful when using the tool.

WARNING!

This symbol indicates important speci­

fications, dangerous conditions, safety 

risks and safety advice.

CAUTION!

This symbol indicates advice which, 

if disregarded, results in damage, 

malfunction and/or functional failure of 

the tool.

QUALIFIED PERSONNEL!

The tool may be used by qualified per­

sonnel only. Handling by non­qualified 

people may lead to injuries to persons or 

damage to the tool or the workpiece.

Immer persönliche Schutzausrüstung tragen! 

Always wear personal protective equipment!

Содержание 9033 N-4

























Отзывы: