HAZET-WERK
5/5
2588/7
11
HAZET 2588-26 Inlet Camshaft Adjuster
Use HAZET 2588-26 Camshaft Adjuster to rotate the inlet camshaft
clockwise
, allowing the fitment of the VVT unit.
Replace the VVT unit bolt and using HAZET 2579-9K Socket tighten
the bolt to the specified torque, whilst counter holding the camshaft
sprocket using a suitable holding tool such as HAZET 2540-2.
Remove HAZET 2588-23 Camshaft Positioning Tool and
HAZET 2588-27 or HAZET 2588-8 Tensioner Locking Tool.
Refit the camshaft cover.
Refit the camshaft adjuster housing.
Replace the vacuum pump oil seal and refit the vacuum pump.
Ensuring the drive lug locates correctly into the slot of the camshaft.
Fit a new ‘O’ ring to the high pressure fuel pump, and refit the pump.
A new banjo bolt must be used when reinstalling the fuel lines.
HAZET-WERK Güldenwerther Bahnhofstraße 25-29
D-42857 Remscheid • Germany
Tel: +49(0) 21 91 / 7 92-0 • Fax: +49(0) 21 91 / 7 92-200
Email: [email protected] Website: www.hazet.com
