HAZET-WERK SAC, Руководство по эксплуатации

Страница: 9 / 20

9
You must wear safety glasses.
Secure separate parts from falling off.
1. Owner’s Responsibility
These instructions only provide advice.
Always make sure that you have a copy
of the appropriate vehicle manufacturer's
service instructions, or another appropri-
ate manual that provides the correct information
needed to correctly execute the work.
• This tool was developed and manufactured ac-
cording to the technical norms and standards valid
at the time and is considered to be operationally
reliable. Nevertheless, the tool set can present a
danger when it is not used as intended or is used
inappropriately by non-qualified personnel. Please
make sure that any person using this tool or car-
rying out maintenance work carefully reads these
operating instructions and fully understands all
provided information before using the tool.
• Keep the operating instructions together with the
tool set at all times.
• Any modification of the tool set is strictly forbidden.
• All security advice, warning and operation notices
on the device must be kept legible. Replace all
damaged labels or stickers.
• All specifications for setting values and setting
ranges must be observed.
2. Appropriate Use
Operational reliability can only be ensured
if the tool set is used as intended and in
compliance with the information provided
in the operating instructions.
In addition to the safety advice in these operating
instructions, the general safety regulations, regula-
tions for the prevention of accidents, and regulations
for environmental protection for the application area
of this tool set have to be observed and respected.
Always ensure tools are used, inspected and main-
tained in compliance with the appropriate local,
state, national or federal regulations.
• The tool set may only be used if it is in good working
order.
• All safety equipment must always be within reach
and should be checked regularly.
• The HAZET SAC Clutch Alignment Tool Set is used
for the professional installation and removal of SAC
clutches (self-adjusting clutches).
• Any deviation from the intended use and/or any
misapplication of the tool set is not allowed and
will be considered as improper use.
• Any claims against the manufacturer and/or its
authorised agents because of damage caused by
improper use of the tool set are invalid.
• Any personal injury or material losses caused by
improper use of the tool are the sole responsibility
of the owner.
3. Dangers
presented by the device
Before each use, check the HAZET SAC
Clutch Alignment Tool Set for correct and
full functionality. Do not use the HAZET
SAC Clutch Alignment Tool Set if correct
functionality cannot be ensured or if damage is
detected. If the HAZET SAC Clutch Alignment Tool
Set is used when not in full working order, you risk
severe personal injury as well as damage to health
and property.
• The device is fully functional when:
- the device runs smoothly
- the device shows no signs of damage.
• The individual parts may only be used in the fore-
seen combinations.
• When operating the HAZET SAC Clutch Alignment
Tool Set do not put your hands into the device, you
risk severe personal injury!
• When operating the HAZET SAC Clutch Alignment
Tool Set, it is necessary to wear safety glasses and
properly fitted protective clothing.
• All service or repair work must be carried out by
qualified personnel only. In order to guarantee
long-term operational safety, only original spare
parts must be used.
• For safety reasons any modification of the HAZET
SAC Clutch Alignment Tool Set is strictly forbidden.
Any modification of the HAZET SAC Clutch Align-
ment Tool Set will result in immediate invalidation
of the warranty and exclusion from liability.
2
For your safety