HAZET-WERK 9035/6, Руководство по эксплуатации

Страница: 8 / 24

8
Technical data are subject to change without notice
The HAZET pneumatic chisel hammer is a handy tool driven with compressed air. It has been
designed for the manual use. It is suitable for the processing of sheet metal for applications like
separating , hitting off bolts etc., for working on brickwork, autoclaved aerated concrete, hollow
blocks, gypsum boards, pumice stone, slag bricks or on similar materials.
The reduced weight of the chisel hammer facilitates even a prolonged use without difficulties. A
great expenditure of force is not necessary.
The air regulation allows a progressive adjustment of the impact power according to the particu-
lar requirements.
The 6-point chisel insert prevents the chisel from twisting. For this reason the chisel is guided in
an optimal way.
Thanks to the ergonomic, cold-insulated rubber handle the hands are protected from getting
cold and the vibrations are strongly dampened. The chisel hammer’s non-slip handle provides a
good grip.
The chisel insert is locked with swivel nut.
The air exhaust is on the frontside.
The connection is effected through a quick-release coupling.
Do not leave plugged-in pneumatic tools unattended.
Always wear personal protective clothing and safety equipment.
Technical Data
Proper
Application
9035/6
Air inlet
1
⁄
4
˝
Impact rate 3000 impacts/min
Chisel insert 10 mm 6-point
Stroke length 67 mm
Number of chisels 5 pieces
Weight 3 kg
Recommended air hose diameter 10 mm
Air consumption 240 l/min
Working pressure 6.3 bar
Sound pressure level Lp A 98 dB(A)
Sound power level LpW 107.5 dB(A)
Vibration acceleration 13.8 m/s 2
GB USA