HAZET-WERK 4798-13, Руководство по эксплуатации

Страница: 8 / 12

8
Tools must not tilt!

For your safety
1. Owner’s liability
• The tool was developed and manufactured
according to the technical norms and standards
valid at the time and is considered to be operationally
reliable. Nevertheless, the device set can present
a danger when it is not used as intended or in an
inappropriate way by non-qualified personnel.
Please make sure that any person using this tool
or carrying out maintenance work carefully reads
these operating instructions and fully understands
all information given before using the tool.
• Keep the operating instructions together with the
device at all times.
• Any modification of the tool is strictly forbidden.
• All safety warning and operating instructions on
the device are always to be preserved in an easily-
legible condition. Immediately replace all damaged
labels or stickers.
• All indications concerning setting values and setting
ranges must be observed.
• These instructions are provided as a guide only.
Always make sure that you have a copy of the
appropriate vehicle manufacturer's service
instructions, or another appropriate manual
that provides the correct information needed to
correctly execute the work.
2. Intended use
Operational reliability is only guaranteed
if the tool is used as intended in
accordance with the information in the
operating instructions.
In addition to the safety advice in these operating
instructions, the general safety regulations,
regulations for the prevention of accidents and
regulations for environmental protection valid for the
application area of this device have to be observed
and respected.
Always ensure tools are used, inspected and
maintained in compliance with the respective local,
state, national or federal regulations.
• The tool must only be used if it is in good working
condition.
• All safety equipment must always be within reach
and should be checked regularly.
• The injector socket insert described here enables
the partial disassembly of a Bosch solenoid valve
injector with an electrical connection nut SW29mm.
This allows access to the screw ring, which can
then be unscrewed with the optional Hazet special
plug 4798-18.