www.haze
base
.com
15
English
9. pump characteristics
Under SETTINGS -> SETTINGS 2 -> MODE the pump characteristic can be adjusted. There are four different
characteristics available.
1. PULSE - This mode means that the pump always mists at the set value. It is not regulated down, when rea-
ching the shutdown temperature, the pump is turned off
2. EXTENDED - This mode also starts with the set pump value. If the temperature in the heating element drops,
the pump is slightly downshifted. This increases the fog duration without a drastic drop in emissions. When the
shutdown temperature is reached, the pump is switched off.
3. FLOOD - This mode is similar to the EXTENED mode, except that the pump is downshifted until the amount
of continuous fog is reached. The machine starts with a high output and then goes into the continuous mist
condition.
4. CONTINUOS - Here, the pump is limited to 30% to ensure a uniform duration fog.
Under SETTINGS -> SETTINGS 2 -> MODE the pump characteristic can be adjusted.
The fine adjustment is used to adjust the amount of mist. You can adjust the pump curve up or down by 5%. If
you have several machines of the same type, you can adjust the output quantity of both machines. The machi-
nes are not exactly the same in terms of production output. Furthermore, aging processes can influence the
output quantity. With this adjustment method you can compensate for the differences.
