background image

WWW.HAYWARDPOOL.COM              USE ONLY HAYWARD GENUINE REPLACEMENT PARTS 

TriStar

 Pump Series 

 

 

       Page 15 of 15             

 

          
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

         

Retain this Warranty Certificate (upper portion) in a safe and convenient location for your records. 

 

      

DETACH HERE:  Fill out bottom portion completely and mail within 10 days of purchase/installation, or register online at 

 

 

        WWW.HAYWARDPOOL.COM. 

 

------------------------------------------------------------------------------------------------------------ 

Mail to

:  

Hayward Pool Products, Inc., 620 Division Street, Elizabeth, NJ  07207, Attn: Warranty Dept.

 

        

     

Warranty Registration Card 

 

 

 

 

Name__________________________________________________

 

Years pool has been in service 

 less than 1    

 1-3    

 3-5    

 5-10 

 

Address________________________________________________ Purchased 

from: 

 

 

 

 

 

 

 

 

 

City______________________ State_________ Zip____________ 

Company name________________________________________________    

 
E-mail Address

__________________________________________ 

Address_______________________________________________________ 

 

City__________________________ State_________ Zip_______________ 

Product Purchased ______________________________________ 
 

 

 

 

 

 

 

 

 

Product Serial No. _______________________________________ 

Please send me more information on these other

 

 New Installation   

 Replacement

 

 

 

 

 

products from Hayward: 

 

 

 

 

 

 

 

 

 

 

Type of In-Ground Pool: 

 

 Pump       

 Filter       

 Automatic Pool Cleaner       

 Light       

 Vinyl   

 

Fiberglass   

 Gunite 

 Chlorinator       

 Skimmer       

 Heater        

 Heat Pump            

 

 Salt/Chlorine Generator       

 Controls                            

Size of Pool______________________________________ 

 

             

 

HAYWARD

®

 LIMITED WARRANTY 

 

This pump was inspected before shipment from our plant.  To original purchasers of this pump, Hayward Pool 
Products, Inc., 620 Division Street, Elizabeth, New Jersey, warrants its products free from defects in materials and 
workmanship for a period of 

ONE

 

(1)

 year from the date of purchase. 

 

Parts which fail or become defective during the warranty period, except as a result of freezing, negligence, improper 
installation, use, or care, shall be repaired or replaced, at our option, without charge, within 90 days of the receipt of 
defective product, barring unforeseen delays. 

 

To obtain warranty replacements or repair, defective components or parts should be returned, transportation paid, to 
the place of purchase, or to the nearest authorized Hayward service center.  For further Hayward dealer or service 
center information, contact Hayward customer service department.  No returns may be made directly to the factory 
without the express written authorization of Hayward Pool Products, Inc. 

 

To original purchasers of this pump, Hayward Pool Products, Inc. warrants its pump housing/strainer to be free from 
defects in materials and workmanship for a period of 

ONE (1)

 year from the date of purchase. 

 

Pump housing/strainers which become defective during the warranty period, except as a result of freezing, 
negligence, improper installation, use or care, or as the result of a use in association with an automatic valving 
system, shall be repaired, at our option, without charge. 

 

All other conditions and terms of the standard warranty apply. 

 

Hayward shall not be responsible for cartage, removal and/or reinstallation labor or any other such costs incurred in 
obtaining warranty replacements. 

 

The Hayward Pool Products warranty does not apply to components manufactured by others.  For such products, the 
warranty established by the respective manufacturer will apply. 

 

Some states do not allow a limitation on how long an implied warranty lasts, or the exclusion or limitation of 
incidental or consequential damages, so the above limitation or exclusion may not apply to you. 

 

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

 

 

 

 

 

 

 

 

 

 

 

Hayward Pool Products, Inc.

 

 

 

 

 

 

 

 

 

620 Division Street 

*Supersedes 

all 

previous 

publications. 

     

Elizabeth, NJ  07207 

Содержание SP3215X20 SP3015EEAZ SP3015X20AZSP3215EE SP3220X25 SP3020EEAZ SP3020X25AZSP3220EE
















Отзывы: