Hayward POWERLINE 15-81500, Руководство по установке

Страница: 30 / 163

10
4. USAGE AND OPERATION
• When running, press “ ” to check the current status of the unit. You can check
water-inlet/water-outlet/condenser/ambient temperature. If no buttons are pressed
within 5 seconds, the LED will display water-inlet/water-outlet temperature.
When the unit is switched off, current ambient temperature is displayed.
The unit's operation data can be set on the control panel.
Please set according the below table:
Remarks:
*Parameter 0: cooling mode only.
**Parameter 09:
0: always open.
1: 60 second delay before compressors start.
30 second delay after compressors stop.
Digit Meaning Range Default Adjust (yes/no)
*0
Return water temperature setting
(cooling mode)
8-28°C 27°C yes
1
Return water temperature setting
(heating mode)
15-40°C 27°C yes
2
Total working time of compressor after
defrost cycle
30-90 MIN 45 MIN yes
3
Set defrost cycle start-up temperature 0-30°C -6°C yes
4
Set defrost cycle stop temperature 0-30°C 13°C yes
5
Max. duration of defrost cycle 1-12 MIN 8 MIN yes
6
System quantity 1-2 2 yes
7
Automatic restarting
0-1
0 (no) 1 (yes)
1 yes
8
Model (cooling only/heat
pump/auxiliary electrical heating/hot
water)
0/1/2/3 3 yes
**9
Water pump model 0/1 1 yes