12
Pool Vac Ultra
MAINTENANCE TIPS
5. POOL VAC ULTRA BUMPER REPLACEMENT:
Replacement of the Pool Vac Ultra Bumper is not recommended as a “Do It Yourself” repair, because there is a
slight possibility that the replacement might cause a problem in the propulsion system. We strongly suggest that
you consult your Hayward Pool Vac Ultra dealer for this repair.
A #2 Phillips screwdriver is necessary for this repair.
a) Turn off pump.
b) Remove Pool Vac Ultra from pool.
c) Disconnect Pool Vac Ultra from leader hose.
d) Turn Pool Vac Ultra upside down, and place it in a position that is steady/firm.
e) Locate and loosen the captive screw behind the throat in the center of the bottom
(see Figures 13, 14 & 15).
Figure 13
BUMPER
CAPTIVE SCREW
LOWER BODY
ASSEMBLY
FRONT
FLAP
