Pool Vac Ultra
MAINTENANCE TIPS
f)
Lift “Easy Opening Bottom” (see Figures 14 & 15).
g) Remove four (4) “A” screws (see Figure 13).
h) Lift the Lower Body Assembly off the Pool Vac Ultra (see Figure 13).
i)
Remove four (4) “B” screws (see Figure 13).
j)
Remove bumper carefully, making sure that other cleaner parts are not moved or disturbed.
k) Remove two (2) “C” screws (see Figure 13).
l)
Replace bumper, again making sure that other cleaner parts are not moved or disturbed.
m) Reinstall screws and parts, following steps in reverse - k, i, h, g, f, e, d, c.
n) Reinstall Pool Vac Ultra in pool per installation instructions and/or installation video.
Figure 14 -
Pool Vac Ultra Concrete
CAPTIVE SCREW
CAPTIVE SCREW
Figure 15 -
Pool Vac Ultra Vinyl
BOTTOM OF CLEANER
BOTTOM OF CLEANER
13
