Hayward HP40B, Инструкция по установке и эксплуатации

Страница: 10 / 32

VI. OPERATION INSTRUCTION
10
1. Operation Display
a. The display shows the Time when the machine is off.
b. The display shows the Temperature of the swimming pool water when the machine is on.
2. Water Temperature Setting
a. Press MODE key to switch between HEAT-COOL modes.
b. Water temperature setting is available whether unit is running or not. Press HEAT or COOL
to start Heat Pump.
c. Press either to adjust water temperature. The controller indicates flashing
temp. Press to adjust to your desired water temp.
d. After 5 seconds, the display will return to its normal mode.
3. Time Setting
a. Time setting is available whether unit is running or not.
b. Press key to set time, when the clock on the screen is flashing, press again to
set hour. Use to adjust hour. Before the flashing stops, press again
to set minute. Use to adjust. After adjusting, press and water
temperature will be displayed. 30 seconds later, the controller display will be back to
normal mode.