USE ONLY HAYWARD
GENUINE REPLACEMENT PARTS
Page 6 of 16
Commercial Filter Valve Adapter Kit
ISHCV375 Rev-A
(Refer to Figure 2-1 and Figure 2-2)
2.2.1.
Glue the two plugs into the correct valve ports as shown using ABS to ABS Cement. No
primer is needed on ABS parts.
2.2.2.
Slide a Union Nut (thread toward union) onto the short pipe assembly from the 3”
Piping Kit HCV375KIT.
Glue the nipple end into valve body port labeled “TOP” as
shown. Use P-70 Primer on pipe nipple only and ABS to PVC cement.
2.2.3.
Glue the elbow assembly section from the Piping Kit HCV375KIT into the valve body port
labeled “BOTTOM” as shown. Make sure the two pipe sections are aligned parallel
before gluing. Use P-70 Primer on pipe nipple only and ABS to PVC cement.
Figure 2-1