background image

 

18 

10. Warranty 

Hayward® Limited Warranty 

To buyer, as original purchaser of this equipment, Hayward Pool Products, 620 Division 
Street, Elizabeth, New Jersey, warrants its products free from defects in materials and 
workmanship for a period of FIVE (5) years from the date of purchase. 

Parts which fail or become defective during the warranty period, except as a result of 
freezing, negligence, improper installation, use, or care, shall be repaired or replaced, at our 
option, without charge, within 90 days of the receipt of defective product, barring unforeseen 
delays. 

To obtain warranty replacements or repair, defective components or parts should be returned, 
transportation paid, to the place of purchase, or to the nearest authorized Hayward service 
center. For further Hayward dealer or service center information, contact Hayward customer 
service department, or visit our website at 

www.Hayward-CommercialPool.com

 for an 

authorized service center near you. No returns may be made directly to the factory without 
the express written authorization of Hayward Pool Products. 

To original purchasers of this equipment, Hayward Pool Products warrants its products to be 
free from defects in materials and workmanship for a period of FIVE (5) years from the date 
of purchase. 

All other conditions and terms of the standard warranty apply. 

Hayward shall not be responsible for cartage, removal and/ or reinstallation labor or any other 
such costs incurred in obtaining warranty replacements. 

The Hayward Pool Products warranty does not apply to components manufactured by others. 
For such products, the warranty established by the respective manufacturer will apply. 

Some states do not allow a limitation on how long an implied warranty lasts, or the exclusion 
or limitation of incidental or consequential damages, so the above limitation or exclusion may 
not apply to you. 

This warranty gives you specific legal rights, and you may also have other rights, which vary 
from state to state. 

Hayward Pool Products, 620 Division Street, Elizabeth, NJ 07207 

*

Supersedes all previous publications 

 

 

 

 

Содержание HCF302




















Отзывы: