Hayward ColorLogic® 4.0, Руководство по установке

Страница: 23 / 28

Even when the lights are off, why does the Lights indicator on the Pro Logic control
panel always turn on whenever the Pro Logic is turned on?
The Lights indicator reflects the state of power to the lights and power is always applied to the
lights when the pool controller is on. The lights run a light show, turn on, or turn off under
program control which is initiated from the Pro Logic. In general, lights will have power applied
even if the lights are not displaying visible light.
Can the Lights relay be configured when used with a ColorLogic Lights Generation 4.0
(CLLG4) system?
No. The Pro Logic automatically assigns the Lights relay to the CLLG4 system and enables
power to the light. Lights are always powered when the pool controller is powered on. To force
this relay off, use Service Mode or System Off mode.
How does the Lights button work?
The Lights button is used for emergency white lighting of the pool. The Lights button sends a
command to toggle the light state. The lights will either turn on (full white) or off. If you press
the button and the lights remain off, press the button again to turn the lights on full white. If you
press the button and the lights stay on, press the button again to make the lights turn off.
Normal color operation of the lights is done through Aux buttons.
FAQs
Page 21