Hayward ColorLogic® 4.0, Руководство по установке

Страница: 12 / 28

Configuring Lights
After all lights are found, each light will need to be assigned an identification number. These
numbers will be shown as LT1,LT2, LT3..., depending on how many lights are found. The
number will identify the light for all future programming of shows, colors, etc.
The light being assigned will blink
to help identify the specific light.
To change the light #, press the + or
– button. Then press the right arrow
button to assign the next light.
The message below will be
displayed if key presses are made
prior to the module storing the
previous information. Simply wait a
moment and try again.
Step N Step O
Page 10