background image

Compatibility

This product is compatible with all Pro Logic controls and with Aqua Logic PS con-

trols operating with software revision r2.00 or higher and using an AQL2-BASE-RF

Base Station operating with software revision r3.00 or higher.  Note that this product

will NOT communicate with the AQL-BASE-RF Base Station.  To verify the software

level of your Aqua Logic control, press the Menu button (possibly multiple times)

until "Diagnostic Menu" is displayed.  Press the ">" or "<" keys (possibly multiple

times) until the main software revision level is displayed (the revision should be 2.00

or higher).  Next, press the ">" key (possibly multiple times) until the "RF Base"

revision level is shown (the revision should be 3.00 or higher).

If the software revision level is less than those specified above, contact the Hayward

Technical Service Dept. from Monday through Friday, 8AM to 8PM Eastern at 908-

355-7995 for information on upgrades.

Installation

AQL2-Wx-RF-PS-x
 Mount models

Requires a Pro Logic PS model or a Aqua Logic PS model operating with software

revision r2.00 or higher.

1.

Base Station required:

  A AQL2-BASE-RF Base Station is required. Note that

this unit will NOT operate with a  AQL-BASE-RF Base Station.

2.

Select Location:

   There are several considerations in choosing the location for

the wireless remote display/keypad:

Protected from the weather:

  The  wireless remote display/keypad must be

mounted indoors or in a weather protected area (rain should never hit the

wireless remote display/keypad).  The wireless remote display/keypad is

designed to mount onto a standard electrical utility box (same size as used

for a triple light switch) or can be mounted directly onto any wall surface.

Within range of Base Station:

  The wireless remote display/keypad must be

installed within 250 ft. (assuming the signal will have to travel through walls)

or 500 ft. (line of sight) from the base station which is typically mounted on

the Pro Logic/Aqua Logic  main control unit at the pool equipment pad.  The

base station can also be mounted up to 500 ft. away from the main control

unit to shorten the distance between it and any wireless remote.  See the

"Remote Mounting of the base station" section of the base station manual

for more details.

Near 120V wall outlet:

   The wireless remote display/keypad uses a plug-in

power supply with a 6 ft. cable.

3.

Mount on wall:

  The wireless remote display/keypad must be mounted indoors

or in a weather protected area (rain should never hit the display/keypad).  Refer

to the diagram on the following page.

a.

Remove display/keypad baseplate from the cover by inserting a screwdriver

into the designated slot. Lift up on the cover while pushing gently with the

screwdriver. See Fig. 1.

1

10

LIMITED WARRANTY (effective 04/01/09) 

Hayward/Goldline warrants its Pro Logic and

E-Command pool automation products as well as its Aqua Rite, Aqua Rite Pro, Aqua Plus and

SwimPure chlorination products to be free of defects in materials and workmanship, under

normal use and service, for a period of three (3) years.  Hayward/Goldline also warrants its

Aqua Trol chlorination products to be free of defects in materials and workmanship, under

normal use and service for a period of one (1) year.  These warranties are applicable from the

initial date of installation on private residential swimming pools in the US and Canada.

Hayward/Goldline warrants all the above-identified pool automation and chlorination prod-

ucts installed on commercial swimming pools and on swimming pools outside of the US and

Canada for a period of one (1) year.  Likewise,   Hayward/Goldline warrants all accessories

and replacement parts for the above-identified pool automation and chlorination products for

a period of one (1) year.  Each of these warranties is not transferable and applies only to the

original owner.

Proof of purchase is required for warranty service.  If written proof of purchase is not

provided, the manufacturing date code will be the sole determinant of the date of installation

of the product.  To obtain warranty service or repair, please contact the place of purchase or

the nearest Hayward/Goldline authorized warranty service center.  For more information on

authorized service centers please contact the Hayward/Goldline Technical Service Support

Center (61 Whitecap Road, North Kingstown RI, 02852) or visit the Goldline web site at

www.goldlinecontrols.com or the Hayward website at www.haywardnet.com.

WARRANTY EXCLUSIONS

:

1. Material supplied or workmanship performed by others in process of installation.

2. Damage resulting from improper installation including installation on pools larger than the

product rating.

3. Problems resulting from failure to install, operate or maintain the product(s) in accordance

with the recommendations contained in the owners manual(s).

4. Problems resulting from failure to maintain pool water chemistry in accordance with the

recommendations in the owners manual(s).

5. Problems resulting from tampering, accident, abuse, negligence, unauthorized repairs or

alternations, fire, flood, lightning, freezing, external water, degradation of natural stone used in

or immediately adjacent to a pool or spa, war or acts of God.

DISCLAIMER.  THE EXPRESS LIMITED WARRANTIES ABOVE CONSTITUTE THE

ENTIRE WARRANTIES WITH RESPECT TO THE ABOVE-IDENTIFIED HAYWARD/

GOLDLINE POOL AUTOMATION AND CHLORINATION PRODUCTS AND IS IN

LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WAR-

RANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO

HAVE OTHER RIGHTS OF EQUIPMENT, LOST PROFITS OR REVENUE, COSTS

OF RENTING REPLACEMENTS, AND OTHER ADDITIONAL EXPENSES, EVEN IF

THE SELLER HAD BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

SOME STATES DO NOT ALLOW THE EXCLUSION OF LIMITATION OF INCI-

DENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR

EXCLUSION MAY NOT APPLY TO YOU.

NO WHOLESALER, AGENT, DEALER, CONTRACTOR OR OTHER PERSON IS

AUTHORIZED TO PROVIDE, SUPPLEMENT OR MODIFY ANY WARRANTY ON

BEHALF OF HAYWARD/GOLDLINE.

THESE WARRANTIES ARE VOID IF THE PRODUCT HAS BEEN ALTERED IN ANY

WAY AFTER LEAVING THE FACTORY. FOR THE ABOVE-IDENTIFIED CHLORI-

NATION PRODUCTS, THESE WARRANTIES ALSO ARE VOID IF, DURING THE

WARRANTY PERIOD, YOU USE A REPLACEMENT CHLORINATOR CELL OTHER

THAN AN UNMODIFIED, NEW HAYWARD/GOLDLINE CHLORINATOR CELL PUR-

CHASED FROM HAYWARD/GOLDLINE. IF A WARRANTY BECOMES VOID, YOU

STILL MAY PURCHASE SERVICE AND/OR TELEPHONE TECHNICAL SUPPORT

AT THE THEN CURRENT TIME AND MATERIAL RATES.

Содержание AQL2-WB-RF-PS-4







Отзывы: