Hayter Harrier 56 560G Скачать руководство пользователя страница 3

Страница: 3 / 20

INTRODUCTION

Thank you for purchasing a Hayter mower. The following pages are designed to help you

gain safe and efficient service from your machine.

IMPORTANT:

This ‘Owners Handbook’ should be regarded as part of the mower as it

gives essential information regarding mower safety, operation, maintenance and specifica

tions. Read and understand this handbook prior to operating your mower for the first time.

Make sure you are familiar with all the controls and points of regular maintenance. If you

have any doubts, consult your local Hayter authorised dealer who will be pleased to give

you assistance.

IMPORTANT:

This mower is designed solely for use in a domestic grass cutting

environment. Use in any other way is considered as contrary to the intended use. Compli-

ance with and strict adherence to the conditions of operation, service and repair as speci-

fied in this handbook also constitute essential elements of the intended use.

This mower should be operated, serviced and repaired only by persons who are familiar

with its particular characteristics and who are acquainted with the relevant safety proce-

dures.

The safety precautions listed in this handbook and all other generally recognised regula-

tions on safety must be observed at all times.

Use of non standard parts or any arbitrary modifications carried out on this machine may

relieve Hayter Limited of liability for any resulting damage or injury.

Hayter mowers are robustly constructed and designed for efficient economical perform

ance under normal mowing conditions. Correct operation and maintenance will ensure a

long and satisfactory service life. Prior to despatch from our factory every effort is made

to ensure that your mower is delivered in perfect condition.

Throughout this handbook all references to

left

and

right

are as viewed from behind the

handlebar, in the direction of forward travel.

This handbook is based on information available at the time of publication.

HAYTER LIMITED reserve the right to amend product specifications without prior

notification.

For a full range of products and to locate your nearest authorised sales stockist, service or parts dealer please visit our website at www.hayter.co.uk

Содержание Harrier 56 560G





















Результаты поиска

Содержание Harrier 56 560G

Отзывы:

Похожие инструкции для Harrier 56 560G

Бренды по названию

Популярные бренды

Hayter Harrier 56 560G, Руководство пользователя

Результаты поиска

Содержание Harrier 56 560G

Отзывы:

Похожие инструкции для Harrier 56 560G

Бренды по названию

Популярные бренды