Haybuster ROCK-EZE H-106, Инструкция по эксплуатации и справочник по запасным частям

Страница: 23 / 70

15
H - 1 0 6 R O C K - E Z E O P E R A T I N G I N S T R U C T I O N S
• Make no modifications to this equipment unless specifically requested or
recommended by DuraTech.
• Tighten or replace any loose or cracked bolts, chains, hoses or connections.
• Check overhead for electrical power lines or other obstructions and be certain
there is adequate clearance before raising hopper.
DURING OPERATION
Enforce the following safety precautions and others contained in this manual to
prevent serious personal injury.
• Never leave the tractor controls unattended while the ROCK-EZE is operating.
• Always make sure the area behind the ROCK-EZE is clear before raising or
lowering the bucket.
• Exercise extreme caution when operating the ROCK-EZE on steep slopes or
grades.
• Be sure all spectators are clear of the area where ROCK-EZE is in operation.
• Be sure that the tractor operator is the only person riding the tractor. Allow no
one to ride the ROCK-EZE at any time.
• Never work around or under the hopper when the hopper is lifted unless the
safety stops are installed on both lift cylinders.
• Watch out for and avoid any object that might interfere with the proper
operation on the machine.
• Keep hands, feet and clothing away from power driven parts.
WHEN PERFORMING SERVICE & MAINTENANCE
CAUTION: Before performing any maintenance or adjustments make sure
machine is NOT running. If for any reason arc welding is to be done, always
ground rotor to frame of machine to prevent arcing on bearings.
• Before working on or near ROCK-EZE for any reason, including servicing,
inspecting or unclogging machine:
• If any service work is to be done on the ROCK-EZE while in the raised position,
be sure to install hold up lock on cylinders or use a safety chain between
movable frame and main frame to prevent dropping in case of hydraulic failure.