Haybuster 2100 BALEBUSTER, Инструкция по эксплуатации и каталог запасных частей

Страница: 10 / 90

2
2 1 0 0 B A L E B U S T E R O P E R A T I N G I N S T R U C T I O N S
Introduction
Your model 2100 BALEBUSTER™ is designed to load and shred most types of baled livestock forage. It is designed
specifically for use on 6-1/2 ft. diameter round bales weighing up to 1,500 pounds and 5-1/2 feet in length.
To avoid possible damage to the machine and risk of injury to the operator, consult with a DuraTech Industries
representative before attempting to shred materials other than livestock forage.
The 2100 BALEBUSTER has multiple uses:
• Laying forage windrows in open fields.
• Filling feed bunks - fenceline, circular etc.
• Spreading straw for livestock bedding.
• Spreading forage over perennial plants, such as strawberries, mushrooms, etc.
• Spreading forage over reclaimed land areas.
Purpose
The purpose of this owner’s manual is to explain maintenance requirements and routine adjustments for the most
efficient operation of your 2100 BALEBUSTER. There is also a trouble shooting section that may help in case of
problems in the field. Any information not covered in this manual may be obtained from your dealer.
SPECIAL NOTE: When reference is made as to front, rear, left hand, or right hand of this
machine, the reference is always made from standing at the rear end of the machine and
looking toward the hitch. Always use serial number and model number when referring to
parts or problems. Please obtain your serial number and write it below for your future
reference.
MODEL 2100 BALEBUSTER SERIAL NO________________
How to use this manual
Manual organization
This manual is organized into the following parts:
• Part 1: Operating instructions explain how to set up, use and maintain the 2100 BALEBUSTER.
• Part 2: Parts reference contains diagrams of each assembly, with the part number of each part. A key on
the facing page contains a description of the part and the quantity used.