APPROVED:
DRAWN:
PART NUMBER
SCALE:
SHEET
OF
REVISION
DRAWING TYPE:
SIZE: A
BY:
ECN NO.
PAG
E
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
C
R
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
(775) 359-4712 FAX (775) 359-7424
E-MAIL: [email protected]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
MJ
02/13/17
4
0510000491.D
1920FR
N/A
3
3
IR
07/10/19
5081
DP
7 o
f 7
INSTALLATION
5400
2019
FV
NOTES:
1 THIS BOTTLE FILLER REQUIRES THE USE OF MODEL 6521FR FREEZE RESISTANT VALVE
ASSEMBLY (SOLD SEPERATELY)
2 VALVE ASSEMBLY MUST BE INSTALLED IN A WARM AREA. PROVISIONS SHOULD BE MADE
TO ALLOW ACCESS TO THE ACCESS PANEL.
3. SEE SEPERATE INSTALLATION DRAWINGS FOR FOUNTAINS, MOUNTING PLATES, BACKPANELS,
4. WHEN INSTALLING THIS UNIT, LOCAL, STATE OR FEDERAL CODES SHOULD BE ADHERED TO.
FOR INSTALLATION HEIGHTS OTHER THAN SHOWN, DIMENSIONS MARKED (*) MUST BE ADJUSTED
ACCORDINGLY.
INSTALLATION ABOVE HAWS 1119FR
AND DRIP TRAY. HOLD ROUGH-IN DIMENSIONS± 1/8" (3.2mm)
27"
686mm
(47-5/8")
(1210mm)
BUTTON
HEIGHT
FOR ADA
COMPLIANCE
6469
6700.4L MOUNTING PLATE
(BEHIND FINISH WALL)
- OR -
6700R RETROFIT PLATE
(ON TOP OF FINISH WALL)
34-1/2"
876mm
37-1/2"
952mm
39-1/2"
1003mm
BP32
1920FR
17-1/4"
438mm
WITH SUPPLIED PUSH IN ELBOW,
TUBING (CONNECT TO NOZZLE
3/8" OD POLYPROPYLENE
7/8" OD INSULATING TUBING (MUST COVER
ENTIRE SUPPLY TUBING, FROM THE
NOZZLE TO MODEL 6521FR ASSEMBLY,
TRIM TO FIT.
CONNECT AIR LINE TO BOTTLE
FILLER PUSH BUTTTON, TRIM TO FIT.
TRIM TO FIT.
1/2" NPT SUPPLY
(NOT SUPPLIED)
1-1/4" NPT
WASTE (NOT
SUPPLIED)
6521 VALVE ASSEMBLY
ACCESS PANEL 2
6521FR FREEZE RESISTANT
VALVE ASSEMBLY (FOR BF) 1
2
