Hawkins 602408 Скачать руководство пользователя

Страница: 6 / 46

General Information

Note the use of signal words DANGER, WARNING, and CAUTION with the

safety messages. The appropriate signal word for each has been selected

using the following guidelines:

SAFETY

308.708.8185 | [email protected]| Rev. 10/19

TAKE NOTE! THIS SAFETY ALERT SYMBOL FOUND THROUGHOUT THIS MANUAL IS USED TO CALL YOUR

ATTENTION TO INSTRUCTIONS INVOLVING YOUR PERSONAL SAFETY AND THE SAFETY OF OTHERS.

FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN INJURY OR DEATH.

Signal Words:

THIS SYMBOL MEANS:

-ATTENTION!

-BECOME ALERT!

-YOUR SAFETY IS INVOLVED!

If you have questions not answered in this manual, require additional copies, or the manual is damaged,

please contact Hawkins Ag, 2120 4th Ave., Holdrege, NE 68949, 308.708.8185, or visit our website:

www.hawkinsag.com.

DANGER

WARNING

CAUTION

DANGER: Indicates an imminently hazardous situation that, if not avoided,

will result in death or serious injury. This signal word is to be limited to

the most extreme situations typically for machine components which, for

functional purposes, cannot be guarded.

WARNING: Indicates a potentially hazardous situation that, if not avoided,

could result in death or serious injury, and includes hazards that are

exposed when guards are removed. It may also be used to alert against

unsafe practices.

CAUTION: Indicates a potentially hazardous situation that, if not avoided,

may result in minor or moderate injury. It may also be used to alert against

unsafe practices.

Содержание 602408















































Результаты поиска

Содержание 602408

Отзывы:

Похожие инструкции для 602408

Бренды по названию

Популярные бренды

Hawkins 602408, Руководство пользователя

Результаты поиска

Содержание 602408

Отзывы:

Похожие инструкции для 602408

Бренды по названию

Популярные бренды