Hawkins 602408 Скачать руководство пользователя

Страница: 24 / 46

Installation Guide

308.708.8185 | [email protected]| Rev. 10/19

(10) - Install blade assemblies on each arm using equal numbers of washers to

keep centered

101 - For Right Blade Assembly, insert Bolt (411594), through right arm.

102 - If installing 16” Notched Coulter Blade (305025), slide six (6) Washers (413072) over Bolt

(411594). If installing 13” Toothed Blade (305049), slide three (3) Washers (413072) over Bolt

(411594)

103 - Wearing leather gloves, carefully slide 16” Notched Coulter (305025), OR 13” Toothed

Blade (305049), over Bolt (411594) (as shown).

104 - Slide two (2) more Washers (413072) over Bolt (411594).

105 - Place Nut (305101) at end of bolt. Tighten evenly using 1 1/8” Impact Driver and 1 1/8“

Wrench.

106 - Repeat Steps 10.1-10.5 for Left Blade Assembly.

IMPORTANT: With 13” Toothed Blades, right and left placement will be different. Ensure the Tooth

will contact the ground facing forward.

CAUTION

Both 16” Notched Blades and 13” Toothed Blades are very sharp. Also, be careful of pinch points between

Trailblazer™ - STC and depth gauge wheel arms. Use leather gloves when handling these parts.

Travel

16” Notched Blade

13” Toothed Blade

Front

Back

Содержание 602408















































Результаты поиска

Содержание 602408

Отзывы:

Похожие инструкции для 602408

Бренды по названию

Популярные бренды

Hawkins 602408, Руководство пользователя

Результаты поиска

Содержание 602408

Отзывы:

Похожие инструкции для 602408

Бренды по названию

Популярные бренды