Hawking HWR54G, Быстрое руководство по установке, Страница: 12 / 15

HWR54G Rev R Hawking Technologies, Inc. P 11
Test
In order for all computers connected to the Wireless Router to work they must be configured
correctly. To test this please open your web browser and type
www.hawkingtech.com in your web
browser’s address bar. If this does not work then POWER OFF YOUR CABLE MODEM OR
DSL MODEM FOR 30 SECONDS. MAKE SURE YOUR WIRELESS ROUTER IS
TURNED ON AND CONNECTED TO THE CABLE/DSL MODEM BEFORE YOU
POWERON YOUR MODEM AGAIN.
(This lets your ISP re-adjust its settings to your new
router) Now power on your PC and try going to www.hawkingtech.com again.
If the page opens with no problem then you may skip the rest of this section and enjoy your new
Wireless-G Router. However, if it does not load, please follow the following steps to complete the
configuration process for each computer that fails the test.
Note: If your computer is not loading the Setup Wizard page during initial setup you may
also follow the following steps to correctly configure your PC.